To introduce to you, the high-end fine imitation watches suggest that every two to three years should do the appropriate maintenance, replacement of waterproof components, detection of travel time performance and movement power consumption, cleaning the movement, and curing the appearance of such maintenance. This will effectively extend the use of your fine imitation watches.
(1) It is generally advisable not to wear the same fine imitation watches every day. Instead, prepare several different fine imitation watches to be used alternately. This will not only enrich the individual’s shape, but also avoid dust and body-waste. It is concentrated in the same fine imitation watch. For leather straps, be careful not to use it every day. The use of straps causes constant wear and tear, so even if the surface is new and new, the fine imitation watches will look very old.
(2) Do not place fine imitation watches on amplifiers, stereos, televisions, and computers to avoid magnetization.
(3) Do not open the back cover of the watch to prevent the dust from entering the movement and affecting the normal work of the watch.
(4) Do not place the fine imitation watches in a closet with mothballs so that the oil does not deteriorate.
(5) Wearing a fine imitation watches, the sweat on the hands is corrosive to the case, the steel case is a nickel-chromium alloy, corrosion resistance is better, the semi-steel case is copper, long-term and sweat contact. It is easy to erode. Always use a soft cloth to wipe off sweat or put on a plastic table to prevent it from being invaded by sweat.
(6) The table was renovated. After the fine imitation watches has been marked with a lot of traces, you can drop one or two drops of clear water on the surface of the watch, and then squeeze a little toothpaste to wipe it. This will remove the striations and make the watch feel as if it is new.
(7) The ordinary mechanical fine imitation watches is affected by dampness. It can be pressed on the fine imitation watches with dry cotton, and baked with a 40-watt electric bulb for 5 minutes. The moisture in the watch can be evaporated. If the quartz electronic precision imitation watches is affected by damp, some small pieces of calcium chloride may be taken and wrapped in gauze; then the cover of the electronic watch is opened, and the packed calcium chloride and the electronic watch are put together in a gas-tight plastic bag. Or inside a glass bottle, sealed. Generally about 3 hours to remove the tide, so that the electronic form back to normal. For moisture-intensive watches, the moisture absorption time can be prolonged.
(8) The fine imitation watches is worn on the wrist. If the watch is a luminous watch, it will have an adverse effect on the body. This is because the indicator of the luminous watch and the luminescent material coated on the dial are mainly a mixture of radium and zinc sulfide. The ray emitted by radium can excite the zinc sulphide crystal to emit light. If a person wears a watch when sleeping, the body will be affected. Eight to nine hours of radium radiation is harmful to people. Therefore, before going to bed, it is best to take down the luminous table and put it on the table.
(9) When you receive a beloved fine imitation watches and remove the outer packaging, you must keep the packing box used to protect the imitation watches. These protective fine imitation watches boxes can provide the most safe protection for the fine copy watches when it is not normally worn, avoiding the fine imitation watches being broken or impacted, so it is absolutely necessary to keep the packing box, and it is recommended that If you don’t wear a fine imitation watches on weekdays, you will have a habit of putting it into the box, which will greatly reduce the chance of damage to the fine replica watches.
(10) Long-term storage of imitation watches that are not worn for a long period of time shall be made on a regular basis once a month, and the fine copy watches of the automatic movement shall be put back and forth gently. Move it for a few minutes or put it on the wrist for a period of time to automatically tighten it. Clockwork. Make the part not in the long-term static state, in order to guarantee the running performance of the watch.
The last thing to remind everyone is:
Replica Watches waterproof, shockproof, magnetic performance is relative, not absolute, generally only play a preventive role, so in use, to avoid watches and water, magnetic contact and collision, so as not to damage the parts.
The life of the fake watch is related to whether the wearer will correctly use and maintain the watch. For example, wearing a watch to take a bath, the appearance of the watch is dirty, the watch strap is too long, and the use environment is harsh, etc., it will make the watch easily damaged and shorten the service life.